Perle PoE Media Converters are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle PoE media converters can also provide power to one or two Powered Devices (PDs). Perle has PoE media converter models that support the IEEE 802.3af PoE standard (15.4W of power) or the IEEE 802.3at PoE+ standard (30W of power). Learn more about PoE.

Perle 10/100/1000 PoE Ethernet to FibrE Converters provide an economical path to extend the distance of an existing network with fibrE cabling. At the same time they function as PoE injectors to power devices like IP phones, video conferencing equipment, IP cameras and Wi-Fi devices over copper UTP cabling.

Multi-port PoE media converters enable a variety of flexible network designs. They can feature single or dual RJ-45 ports to power one or two PD’s per converter and single or dual fibre ports.

Network Administrators can \\\\\\\"\\\\\\\"see-everything\\\\\\\"\\\\\\\" with Perles advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Fibre Fault Alert, and Loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perles Gigabit rate converting PoE Media Converters the smart choice for IT professionals.

Power over Ethernet

• PSE function for IEEE 802.3af (15.4W) and IEEE 802.3at (up to 30W) compliant devices.
• Available in PoE and PoE+ models supporting Type 1 and Type 2 PD gear.

Advanced power management

• Control PSE power by UTP port.
• Detect PD signatures and power classifications.
• Over-current protection.

PD power reset

• Configurable power reset function for remote equipment.

Powered device support

• Compatibility with a wide range of PDs, including IEEE Standard PoE/PoE+ and legacy devices.

Multiport configurations

• Various port options, including 2-port, 3-port, and 4-port configurations with UTP and fiber ports.

Fibre redundancy

• Dual fiber models with automatic switching for enhanced reliability.

SFP speed sensing

• Auto-detection of Gigabit/Fast Ethernet SFPs.

Auto-Negotiation and Auto-MDIX

• Auto negotiation for optimal speed and duplex settings.
• Automatic medium-dependent interface crossover for cable type detection.

Smart Link Pass-Through

• Reflects port state on copper Ethernet based on fiber port state.

Fibre fault alert

• Provides fault notification between 1000Base-X receiver and transmitter.

Pause (IEEE 802.3xy)

• Supports pause signaling for data transmission control.

Duplex

• Full and half duplex operation supported.

Jumbo Packets and VLAN

• Transparent to jumbo packets up to 10KB.
• Transparent to VLAN tagged packets

Remote loopback

• Capable of loopback on 1000Base-X fiber interface.